{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Go down

Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on July 13th 2009, 2:50 am

I went and bought this 4 door for parts, it's TOO NICE! to cut up and JUNK. has good running 250 CID and a C4, no PS, no PB I stole the grille and the radio so far, I will sell it before I take too much more stuff off, I have yard driven it, needs love to be put on the road again, make a neat Mayberry RFD cop car! it is RUST FREE VA. car, Inside nice but DIRTY, been setting for 10 Years. May take trades + cash, RARE 1970-1/2.and yes, it can get in the Pumpkin Run!..Cash $800 bucks, trade value higher....John 513-312-8799







Last edited by falconwagon62 on November 15th 2009, 5:53 am; edited 1 time in total
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by xycho_wraith on July 13th 2009, 11:34 pm

if i had 800 i would

xycho_wraith
Forum Junky

Number of posts : 1674
Registration date : 2008-07-11

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on July 17th 2009, 1:24 am

No body wants a coooool 4 doooor cruiser????? I was afraid of that....

link to all the pictures on Photobucket...

http://s219.photobucket.com/albums/cc299/falconwagon62/1970%205%204%20door%20sedan/?albumview=slideshow
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by xycho_wraith on July 17th 2009, 5:22 am

i thought ppl was over this its a 4 door crap
its old
its rare
its a good start
soon you will be lucky 2 see stuff like this 4 door or not

personally i got a real thing 4 station wagons so be it laugh its cool its cool

right john ?

xycho_wraith
Forum Junky

Number of posts : 1674
Registration date : 2008-07-11

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on July 17th 2009, 7:20 am

Thanks Kenny,

Most people agree 4 doors SUCK....but little cash, or lots of kids, that's the way to go, as you guys know, I LOVE STATION WAGONS...most are 4 door, but 2 of mine are 2 door wagons, but a good cheap entry level Pumpkin Run Car, here is what I have in mind.....Mayberry RFD, Barney was gone but Warren has there! 1970-1/2 falcon....to cool

here is a AMC...but you get the idea..

avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by xycho_wraith on July 17th 2009, 10:08 am

old cop rods are always cool them and hearse i don't care 4 the taxi rods thou that's just lame

xycho_wraith
Forum Junky

Number of posts : 1674
Registration date : 2008-07-11

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by RebStew on July 17th 2009, 11:27 am

Isn't that body car the same plain white wrapper cop car that got stuck over the hill in the first gone in 60 seconds. It's the first cop car that seen the "Stang when he took it. Black guy and a white guy driving it.

_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.
avatar
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 89
Location : Newport Ky

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on July 17th 2009, 11:39 pm

tinkered with the brakes, all good now....next the gas tank, and clean it up!

JW
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by xycho_wraith on July 17th 2009, 11:44 pm

all i got left is a 1991 Buick park ave rust dent free clean clean car needs steering column i keep getting the money 2 fix it and my 79 keeps steeling it
its not Ur style thou or id consider a trade but i know the answer so i don't even know why i just typed this lol

xycho_wraith
Forum Junky

Number of posts : 1674
Registration date : 2008-07-11

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on July 18th 2009, 12:28 am

Never hurts to ask, but I have all the "cars" I need, looking for old iron and stuff..Pinball machines, juke boxes, beer signs, shop equipment-Tire Changer-Balancer-ect...Zero turn mower for the homested here...

JW

xycho_wraith wrote:all i got left is a 1991 Buick park ave rust dent free clean clean car needs steering column i keep getting the money 2 fix it and my 79 keeps steeling it
its not Ur style thou or id consider a trade but i know the answer so i don't even know why i just typed this lol
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on August 9th 2009, 6:56 am

Last time before I fix the gas tank and paint in the Black to make my State Trooper or Macon County Line car!! John
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on October 19th 2009, 5:11 am

one last time....John
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by John B on October 19th 2009, 5:13 am

Brother if I could get some tire kickers to pull the trigger and buy this stupid Mazda truck, I buy this car in a heart beat.
avatar
John B
1000 post club

Number of posts : 1028
Registration date : 2007-10-09
Age : 48
Location : Olive Hill,KY

View user profile http://www.kustomtrophy.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on October 20th 2009, 1:21 am

SOLD TO DOUG ICE....New work car!!!
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by Mr. Fabulous on November 10th 2009, 7:03 pm

Got the title transfered today along with plates. Plan on finishing it up tonite and replacing that @#$ solenoid.
avatar
Mr. Fabulous
Blowing fire

Number of posts : 2042
Registration date : 2007-10-10
Age : 30
Location : 2500 miles East of LA

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on November 10th 2009, 7:56 pm

Mr. Fabulous wrote:Got the title transfered today along with plates. Plan on finishing it up tonite and replacing that @#$ solenoid.

Glad it is going to Falcon Eddie, I mean Mr. Fabulous.......or who ever you are! Enjoy it, just glad i didn't junk it....is is to nice of a car..
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by Mr. Fabulous on November 10th 2009, 8:41 pm

Maybe it's the Fabulous Falcon Eddie LOL

My Daughter, for some reason, is really excited about this old Ford. She wants to start scrubbing and waxing the old beater.
avatar
Mr. Fabulous
Blowing fire

Number of posts : 2042
Registration date : 2007-10-10
Age : 30
Location : 2500 miles East of LA

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by falconwagon62 on November 10th 2009, 10:24 pm

scrubbing and waxing the old beater.


Better...it smells!!!! pig pig
avatar
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 53
Location : Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by Mr. Fabulous on November 10th 2009, 11:08 pm

Yeah, that's from the previous owner I got it from!
avatar
Mr. Fabulous
Blowing fire

Number of posts : 2042
Registration date : 2007-10-10
Age : 30
Location : 2500 miles East of LA

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by RebStew on November 10th 2009, 11:42 pm

Don't scrub too hard. The paint may be the only thing holding it together.

_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.
avatar
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 89
Location : Newport Ky

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by FalconEddie1964 on November 11th 2009, 4:49 am

Hey, hey, hey....................that old Ford is in better shape and a heck of a lot cheaper than some of the Chevys on here. We tuned it up, changed the oil and put the new tires on this evening. I need a glass pac so I can put a cannon on it and shoot some fire. Give me fuel, give me fire!
avatar
FalconEddie1964
Blowing fire

Number of posts : 1388
Registration date : 2008-02-06
Age : 38
Location : At the races, top row of the grandstand at about 1000 ft

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by RebStew on November 11th 2009, 7:19 am

Yeah I know. I like the little Ford. I thought about getting it.

_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.
avatar
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 89
Location : Newport Ky

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by Mr. Fabulous on November 11th 2009, 2:10 pm

Jeff wants to lay a 460 down in it.
avatar
Mr. Fabulous
Blowing fire

Number of posts : 2042
Registration date : 2007-10-10
Age : 30
Location : 2500 miles East of LA

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by RebStew on November 11th 2009, 4:53 pm

I'd leave the 6 banger in it till it blows. Even then I would try to find a sixer to stick in it. Screw a 460. 460's are boat anchors. 302 if a v8 had to go in it. Gas milage baby!!!!!! You can still find that old Clifford speed stuff for the 6 banger motor. My be cool to dress it up some and run a small 4V so you can have more gas to shoot flames with. What size is that motor?

_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.
avatar
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 89
Location : Newport Ky

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by RebStew on November 11th 2009, 4:56 pm


_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.
avatar
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 89
Location : Newport Ky

View user profile

Back to top Go down

Re: Falcon Eddie's 1970-1/2 Falcon 4 door driver build

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum